Aluminum Alloy and Zn Alloy | Be, Mg, Al, Si, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Cd, Sn, Pb, Bi etc. |
Stainless Steel | Al, Si, Ti, Cr, Mn, Fe, Ni, Cu, Mo, V, Nb, W etc. |
Cu Alloy | Be, Al, Si, Cr, Mn, Fe, Ni, Cu, Cd, Sn, Pb etc. |
Parameter | Al Alloy Version | Stainless Steel Version | Cu and Zn Alloy Version | Full Function Version |
Laser grade | Class 3B | |||
Stainless steel grade recognition | × | √ | × | √ |
Aluminum alloy grade recognition | √ | × | × | √ |
Cu and Zn alloy grade recognition | × | × | √ | √ |
Single test time | 1 second | |||
Battery capacity | 3250mAH | |||
Dimension | L227*W86*H234mm | |||
Weight | 1.25Kg | |||
Waterproof level(IP54) | √ | √ | √ | √ |
WIFI | √ | √ | √ | √ |
Bluetooth print | ¡ | ¡ | ¡ | ¡ |
Pelican Protective box | √ | √ | √ | √ |
Warranty | 1 year | |||
Extended warranty service | ¡ | ¡ | ¡ | ¡ |
Handheld LIBS alloy spectrometer | Handheld XRF alloy spectrometer | |
Safety | Without any ionizing radiation, 3B eye safety laser. | X photoionizing radiation, safety protection should be paid attention to when using, and the operator should go to work after strict training. |
Detection speed | The equipment is ready to use and easy to operate. The alloy grade and element content can be obtained in 1 second. | The equipment needs a long time to warm up, the alloy grade can be displayed after 1~3 seconds, and the element content can be displayed after 15~30 seconds. |
Use and maintenance costs | There are no vulnerable parts, the service life of core components exceeds one million tests, and the maintenance cost in normal use is extremely low. | X-ray tubes and fluorescence detectors are both consumable and vulnerable parts, which are expensive to replace. |
Analyzable elements | Covering almost all metal elements, it can be used for grade and composition identification of various heavy and light alloys. | Mainly for the identification of heavy metal elements, not as good as stainless steel and alloy steel, but cannot test alloys such as aluminum alloy. |